Overview
A water jacket is a product that cools the outer periphery of the electrode and holder by running cooling water inside.
The higher the cooling effect, the better the weld quality.
Features
Round Type
Directly cools the outer periphery.
The cooling water flowing inside directly cools the outer periphery of the holder so it has a high cooling effect.
Avoiding interference with workpiece
It enables to avoid interference with the workpiece because the openings for hose joints are placed at the back.
Built-in O-ring
The built-in O-ring helps to prevent from being out of position and water leaking.
Square Type
No water leakage during adjustment
The cooling water passes through a channel inside the block, so there is no need to worry about water leakage during height adjustment.
Part with wrench flats can also be cooled.
